MVM Office Security - Locknetics

Locknetics has been designing, engineering and manufacturing security products and systems for over a quarter century. Locknetics products and systems establish the technological edge in electronic, electro-magnetic and electro-mechanical locking devices and door control.

With an integrated design and manufacturing philosophy, Locknetics is positioned to be your premier security products supplier. You can secure your future with Locknetics.

Magnetic Locks - Solid Silent Security!

Magnetic locks provide solid locking security with minimum action, since there generally are no moving parts. With a variety of models to fit most any application, Locknetics is your source for electronic locking system components accommodating life safety and security concerns.

390 Series Magnetic Locks

The 390 Series is Locknetics flagship line of magnetic locks. These 1650 pound holding force magnets allow you to install a secure and versatile magnetic lock system with an abundance of features which are built into the magnets. Changeable option boards offer a variety of integral functions which allow you to create a "system" on the fly. This complete family of magnetic locks allows you to tackle practically any installation. 390 Series locks are available in a variety of architectural finishes, as well as full length or custom length housings.

Specifications:

Overall Size: 10-1/2"L - single / 20-5/8" - double
Current draw: .67 amp @12VDC; .35 amp @24VDC
Holding force: 1650 lbs direct holding force
Standard features: Field Selectable dual voltage

Models available:

390 - Standard single magnet
391 - Standard single magnet with split armature for double doors
392 - Standard double magnet for double doors

Options Available:

MBS - Magnetic bond sensor - senses bond between the magnet and the armature
DSM - Door status monitor - senses closure of the opening
ATD - Adjustable time delay - delayed relocking of the magnet
RCP - Rectifier - for use with AC power
SMTD - Signal module time delay - delayed relocking with an audible signal

Accessories:

HDB - Herculite door bracket - for use with solid glass doors
TJ - Top jamb mounting bracket - for use with in-swinging doors

280 Series Magnetic Locks


The 280 Series Shear Locks offer superior strength and versatility.  The
armature interlocks with the magnetic lock to offer maximum resistance to
forced entry.  280 Series full mortise magnetic locks are fully concealed
in both the door and frame and feature a holding force of 2700 lbs.

Specifications:

Overall Size: 8-9/16"L x 1-1/2"W x 1-1/4"H
Current draw: .90 amp @12VDC; .45 amp @24VDC
Holding force: 2700 lbs minimum holding force in shear
Standard features: Field Selectable dual voltage

Models available:

280 - Shear lock - metal frame applications
280TRD - Shear lock - top rail mounting assembly
280BRD - Shear lock - bottom rail mounting assembly
280WF - Shear lock - for wood frame applications (available in 12V only)

Options Available:

MBS - Magnetic bond sensor - senses bond between the magnet and the armature
RCP - Rectifier - for use with AC power

Accessories:

280-71 - Extender tabs for installing a 280 lock in an old 271 cutout
280-700 - Replacement kit for Von Duprin 700 series - fits model 280 only
WFT - Wood frame tabs

290 Series

290 Series shear locks are available in full surface and semi-concealed 
models to suit your application requirements and have a holding force of 
3000 lbs.  Detail sheets on the 290 Series locks are available from 
our customer service department. The spec sheet can be downloaded from the
link above.

Locknetics 320 Series Magnetic Locks


The 320 "MiniLine" family of electronic locks offers a wide variety of
surface mounted and concealed locks for traffic control applications.  With
dual voltage coils, a holding force based on the voltage used and several
mounting options, your selection of the 320 Series is the right choice for
medium security traffic.  Most models are also available in several
architectural finishes.

Specifications:

Overall Size: 7"L - single / 14" - double
Current draw: .225 amp @12VDC; .45 amp @24VDC
Holding force: 500 lbs @12V  /  650 lbs @24V
Standard features: Dual voltage

Models available:

320 - Standard single magnet
322 - Standard double magnet for double doors
320SC - Semi-concealed TJ for in-swinging doors
320M - Mortise magnetic lock
320P - Center pull - utilizes 320M magnet with an aluminum pull handle

Options Available:

MBS - Magnetic bond sensor - senses bond between the magnet and the armature
DSM - Door status monitor - senses closure of the opening
ATD - Adjustable time delay - delayed relocking of the magnet
RCP - Rectifier - for use with AC power
AB -  Armature block for use with 320M

Accessories:

HDB320 - Herculite door bracket - for use with solid glass doors
HDB322 - Herculite door bracket - for use with a pair of glass doors
TJ30 - Top jamb mounting bracket - for use with in-swinging doors
TJ32 - Top jamb mounting bracket - for use with in-swinging doors
DB30 - Double bracket kit for mounting two single magnets on a pair
Full length custom housings are available for the 320 & 322

301+ Series Delayed Egress Plus Electromagnetic Locks


The 301+ Series is designed to meet NFPA Life Safety Code 101
while providing ongoing access controlled security. This new generation of
delayed egress technology provides an easy to install, cost-effective
solution to life safety and security applications. It's ideal for retrofit,
operating independent of any existing locking device or door lock.

The 301+ Series features a swinging magnet which triggers a signal to the microprocessor based controller. The controller and monitor panel assembly provides the 15 or 30 second delay, audible alarm and LED indicator. Mounted on a three gang electrical plate, it also provides a TouchEntry Reader for reset and legal release functions.

The 301+PS system, in addition to the swinging magnet, includes a controller and one amp 12/24VDC power supply mounted in a NEMA-1 enclosure. A two gang monitor panel is also provided.

Two TouchEntry data keys are shipped with each system. The 301+ Series can accommodate up to 150 TEK keys, and accepts TouchEntry Readers and SelectEntry keypads.

Features:

Automatic voltage selection
Low voltage alert
Fire alarm terminals & alarm contacts
Legal release & reset inputs
Auxiliary input
Alarm contacts
TouchEntry Reader
LED indicators and audible alarm
Programmable relock and nuisance delays
Selectable nuisance alert delay, egress time & unlock alarm

Specifications:

Overall Magnet Size: 7-1/4"L x 2-1/8"H x 1-3/4"D
Armature Size: 4-1/4"L x 1-1/2"H x 5/8"D
Current draw: .53 amp @12VDC; .65 amp @24VDC
Holding force: 500 lbs @12V  /  650 lbs @24V
Standard features: Dual voltage (auto-sensing) 12/24 AC/DC
301+PS Features: Includes 12/24VDC 1 amp power supply
Audible: 80db @ two feet

Models available:

301+ - Single door locking system with controller/monitor panel
301+PS - Single door locking system with MBS, controller/monitor
                panel assembly and controller/power supply

Options Available:

MBS - Magnetic bond sensor - senses bond between the magnet and the armature
DSM - Door status monitor - senses closure of the opening
ATR - Audit trail record
BOCA - Boca Code model (complies with BOCA requirements)
MX500 - Memory expansion chip for 500 users (includes ATR option)
SEC -  Security alarm
Finishes - Available standard in satin silver powder coat, optional
                black textured powder coat.

Accessories:

TEK-1 - TouchEntry Data Key
TEK-2 - TouchEntry Data Key on a key fob
TEP-1 - Entry level programmer
TEP-2 - Keypad programmer
TEP-3 - Interrogator / Programmer
TR780 - TouchEntry reader - narrow
TR781 - TouchEntry reader - single gang
KP73+ - SelectEntry Keypad
KP74+ - SelectEntry Keypad
KP76+ - SelectEntry Keypad
KP77+ - SelectEntry Keypad
100-CAB - Dual keypad cable
804 - Four zone remote monitoring station (requires MBS option)

GF3000 Series Electromagnetic Mortise Shear Locks


The GF3000 Series shear locks feature a patented design offering
advances over any shear lock on the market. With its unique floating action,
the armature and magnet are attracted to one another on application of power.
This allows for the GF3000 to overcome gaps of up to 1/4" without a large
voltage inrush. Once engaged, the shear lock provides 3000 pounds of
holding force without the high operating temperatures normally associated
with other shear locks.

The mortise shear lock offers the advantage of a totally concealed locking mechanism, providing superior security and appearance. The patented design incorporates locking tabs on the magnet assembly with mating grooves in the mating armature plate.

The shear lock is ideally suited for commercial grade quality hollow metal doors and frames as well as Herculite doors with a top rail. The GF3000-TRD model is available for when armature adjustment is necessary from the door edge due to flush ceiling conditions.

Features:

Automatic voltage sensing - 12 to 24VDC
Floating armature and magnet
3000 lbs of holding force
Allows bridging of gaps up to 1/4"
Microprocessor based control module included
Automatic delay and relock adjustable from 1 to 30 seconds
UL & ULC Listed for use on fire labeled openings
Five year warranty

Specifications:

Magnet Size: 8-3/16"L x 1-1/2"H x 1-1/2"D
Magnet Size (including tabs): 9-1/2"L x 1-1/2"H x 1-1/2"D
Armature Size: 8-3/8"L x 1-3/8"H x 1/2"D
Armature Size (including yoke): 10-5/8"L x 1-3/8"H x 1"D
Current draw: .90 amp @12VDC; .45 amp @24VDC
Holding force: 3000 lbs
Wiring: 12" leads from control module

Models available:

GF3000 - Single door gravity force magnetic lock
GF3000-TRD - Single door gravity force magnetic lock with top rail
                    mounting assembly for doors with zero clearance condition
                    between the top of the door and the ceiling. Adjustment
                    of the armature assembly is accomplished from the edge
                    of the door

Options Available:

MBS - Magnetic bond sensor - senses bond between the magnet and the armature
DSM - Door status monitor - senses closure of the opening
RCP - Rectifier for use with AC current

Pentagon 100 Series

. . . provides innovative integration of access control and electronic locking. This new generation of microprocessor controlled magnetic locks provides on-board logic for TouchEntry access control readers and keypads. You have the option of using either a keypad or a TEK reader for access without any additional control equipment.

You can program Pentagon Series systems at the door, or using a palmtop or laptop computer, you can set up the programming in advance and upload it to the lock. The computer interface capabilities also allow you to audit previous transactions.

All 100 Series locks feature these key features -

Automatic voltage selection
Security Alarm
On-board logic for access control
Programmable access control
On-board transaction memory
Fire control system integration
Up to 150 user codes per system

101+ - Delayed Egress Plus
- A delayed egress locking system which meets NFPA 101 life safety codes. It features a rocking magnet design which triggers a 15 or 30 second delay and an audible signal. It is available with several options including master/slave and dual lock/single housing units for double doors.

103 - Defender
- An impact absorbing high security magnetic locking system designed for the toughest systems applications in the harshest environments. It will absorb up to 2520 inch lbs of dynamic force without releasing - the equivalent to three times the highest ANSI/BHMA standard for loads. This lock is recommended wherever high security is paramount!

105 Sensorlock
- The 105 is designed to release immediately with no special knowledge required. It provides an easy to install "system" where individual components previously had to be used. By using a dual element pyroelectric sensor, it detects an egress attempt and unlocks.

107 Delayed Egress
- The 107 delayed egress system is triggered by an external sensor such as a touch bar - which will trigger a 15 or 30 second delay and an audible sound. Double housings for pairs of doors are also available.

109 - Powerlock Plus
- The Powerlock Plus is an integrated access control system within a magnetic lock housing. It accepts either TouchEntry TEK readers or keypads for access. It is an integrated solution to your access control needs.

Power Supplies

Locknetics modular power supplies make it easy and cost-effective to power your electric locking system. All three series of power supplies feature low voltage DC, regulated & filtered with a built in battery charging circuit. All enclosures are NEMA 1 approved, measuring 12" x 12" x 4"D. Options can be added using plug in modules.

505 Series Power Supplies

- A boxed power supply, regulated and filtered which provides up to 1 amp for the operation of electronic locking systems.

Specifications:

Overall Size: 12"H x 12"W x 4"D - Standard NEMA enclosure
Supplied voltage: 12VDC or 24VDC @1 amp - field selectable output
Standard features: Battery charging circuit, filtered & regulated
     output, fused primary circuit, UL Listed & ULC

Options Available:

SBP1 - Standby battery pack - 12VDC with cable kit
SBP2 - Standby battery pack - 12/24VDC with cable kit
PLC - Power line cord (6')
KLC - Key lock cover

Accessories:

CAB - Cable kit for batteries

510 Series Power Supplies


- A boxed power supply / controller, regulated and filtered and available with 
a complete range of options.  Options can be factory or distributor assembled.

Specifications:

Overall Size: 12"H x 12"W x 4"D - Standard NEMA enclosure
Supplied voltage: 12VDC @3 amp or 24VDC @2 amp - field switchable
Standard features: Battery charging circuit, filtered & regulated
     output, fused primary circuit, UL Listed & ULC, modular design for
     addition of plug-in modules

Modular Options Available:

ICM - Interlock control module
DCM - Dual control module - relay control of 1 or 2 stations
CMR - Control module rack - holds up to 3 DCM's
TDM - Time delay module (adjustable relock time)
MR - manual reset (for Canada) which includes EIR option
EIR - Emergency interface relay module
KLC - Key lock cover

Standby Power Accessories:

SBP1 - Standby battery pack - 12VDC with cable kit
SBP2 - Standby battery pack - 12/24VDC with cable kit
SBE-KLC - Standby battery enclosure with key lock cover
CAB - Cable kit for batteries

515 Series Power Supplies


- A boxed power supply / controller, regulated and filtered and available with 
a complete range of options.  Options can be factory or distributor assembled.
The 515 Series can be supplied in either 12VDC or 24VDC models.

Specifications:

Overall Size: 12"H x 12"W x 4"D - Standard NEMA enclosure
Supplied voltage: 12VDC @10 amp or 24VDC @5 amp - SPECIFY VOLTAGE
Standard features: Battery charging circuit, filtered & regulated
     output, fused primary circuit, UL Listed & ULC, modular design for
     addition of plug-in modules

Modular Options Available:

ICM - Interlock control module
DCM - Dual control module - relay control of 1 or 2 stations
CMR - Control module rack - holds up to 3 DCM's
TDM - Time delay module (adjustable relock time)
MR - manual reset (for Canada) which includes EIR option
EIR - Emergency interface relay module
KLC - Key lock cover

Standby Power Accessories:

SBP1 - Standby battery pack - 12VDC with cable kit
SBP2 - Standby battery pack - 12/24VDC with cable kit
SBE-KLC - Standby battery enclosure with key lock cover
CAB - Cable kit for batteries

Accessories

Locknetics manufactures a wide variety of access and exit controls to meet your security needs. The heavy duty 600 family of buttons and keyswitches is designed for those tough applications, while the 700 Entry Level family is a general all purpose series for light commercial applications. A detailed catalog of 600 & 700 Series station controls is available on request.

Access & Egress Controls

770/780/790 Series
- For premier access controls, the Locknetics 770, 780 and 790 Series provide sophisticated, secure and flexible solutions to your security problems. (The 773/774 Keypad is shown here) All feature a microprocessor control on the secure side of the opening with programming accomplished from either the keypad or touch entry reader. The TEK touch entry keys are an excellent alternative to cards. The TEK key is a smart data chip contained in a stainless steel disc. Sealed to protect it from moisture, corrosion and static discharge, it can be supplied on a key fob or can be attached to an ID card, badge or bracelet.

The following features are common to all three series -

12-24V AC/DC power input
1 amp DC auxiliary output at supplied voltage
200 ma maximum current draw
Main relay - 5 amp@30VDC - DPDT
Two 5 amp@30VDC SPDT auxiliary relays
Steel controller enclosure - NEMA Grade 1
LED status indicator
Optional audit trail record
Adjustable time relay control - 0-255 seconds

The 770 SmartEntry Series  is available with several keypad options
and comes standard with the ability to accept up to 20 user codes.  It can
be expanded to accept 150 codes and optional computer ports for programming
and interrogation.

770 Membrane keypad with stainless steel housing
772 Membrane keypad with machined aluminum housing
773 Stainless steel buttons with a machined aluminum housing
774 Stainless steel buttons and housing

The 780 TouchEntry Series is available with your choice of a large or small TEK reader housing. These heavy duty cast stainless steel housings resist the most brutal attacks. Entry is achieved by simply touching the TEK key to the reader. Can also be programmed via a laptop or palmtop computer.

780 Narrow style - 2-5/16"H x 1-3/8"W
790 Single gang - 4-1/2"H x 2-3/4"W

The 790 SmartEntry with TouchPlus combines the digital keypad and TEK technologies in one system. You can use either the reader or the keypad or require that both the reader and the keypad be used for access, creating a credential requirement for access. Can be programmed via a laptop or palmtop computer.

790 Membrane keypad with cast stainless steel housing with TEK reader
794 Stainless steel buttons and housing with TEK reader

671 Touchbar


- The 671 Touchbar is a non-latching electromechanical releasing device which
allows egress at doors equipped with electric locks.  Pushing the 671
Touchbar at any point on the bar activates an internal switch which
controls power to the locking device.

The 671 features a contemporary design with only one-quarter of an inch movement required to activate the internal switch.

Specifications:

Switch Contacts: SPDT rated 3 amp@30VDC / 5 amp@125VAC
Wiring: 3 conductor cable - 18" length
Lengths: standard lengths for 36", 42" and 48" doors
Finish: standard finish is 628 (aluminum)

Options Available:

DPDT Switch rated 5 amp@125VAC / 3 amp@30VAC
Custom Length available to order
Finish optional duranodic finish (313) at a higher price
WD Wood door kit (fasteners)
Armored door cords available to order

690 SmartBar

- The 690 Series SmartBar is an electronic switching device with no moving parts, which serves as a non-latching exit bar at an egress door. It allows one motion egress at doors equipped with electric or electronic locks with "no prior knowledge" required by the user. Touching the SmartBar at any point on the bar activates internal circuitry which controls power to the locking device. No moving parts results in low maintenance and a long life.

The SmartBar provides redundant detection systems to sense an exit request. the first is a capacitance touch sense circuit which detects a change in capacitance when a person touches the metal portion of the bar. The second is an infrared light beam which is directed across the front of the bar. As a person touches the bar, the light beam is broken. Either the capacitance or the light beam detection will activate the unit.

An optional audible alarm is available, which provides a security alarm to alert when there is a prolonged unlocked condition caused by a continued capacitance signal or a continued break in the light beam.

Specifications:

Voltage: 12 or 24 VAC/DC
Switch Contacts: SPDT rated 3 amp@30VDC
Wiring: 9 conductor cable - 24 AWG - 16 feet long (7 conductors used)
Lengths: standard lengths for 36", 42" and 48" doors
Finish: standard finish is 628 (aluminum)

Options Available:

Custom Length available to order
Finish optional duranodic finish (313) at a higher price
AUD Audible alarm
WD Wood door kit (fasteners)

CM5000 & CM5400 Computer Managed Locking Systems

Locknetics CM Series computer managed locking systems are heavy duty mechanical locks combined with sophisticated electronic access components. The CM5000 Series (shown at the left) is a heavy duty cylindrical lockset which will replace a lock in a standard 161 prep. With several keypad options as well as the TEK reader option, the CM5000 locks can give you excellent control over access, and relate that access control to other access systems by Locknetics.

The CM5400 Series is a heavy duty mortise lockset featuring a built in keypad and TEK reader. Its new integrated design replaces the former CM5200 series.

All of the CM Series locks share some unique characteristics -

Battery powered - up to 80,000 cycles
Choice of TouchEntry or Keypad for access
150 user codes per controller
Optional 100 event audit trail
Micro-processor controlled on the secure side of the door
Lever handles meet ADA requirements
Available in standard architectural finishes
Mechanical key over-ride for emergency access
Interface with palmtop or laptop computer for programming/audit retrieval

The CM Series locks integrate with hard wired systems by virtue of the computer interface and TEK capabilities. TEK readers (on CM5000 Series) are stainless steel - keypads are either a black Lexan housing or stainless steel. The TEK reader point on CM5400 Series is a built in feature.

The CM5000 Series is a grade 1 extra heavy duty cylindrical lock available with either a classroom/storeroom function, an office function or dormitory/privacy function.

The CM5400 Series is a grade 1 extra heavy duty mortise lock available in several standard functions both with and without a deadbolt.

Both series are available in a variety of standard architectural finishes and with several cylinder options.